Internet Download Manager 5.19 + Crack

http://tinyurl.com/idm519pluscrack

avast! 4.8 KeyGen

-=Download=-
http://tinyurl.com/2a8s5y2

-=Virus Results=-
http://tinyurl.com/avastkeygenavresults

Internet Speed Hack [Smart BRO]

Smart BRO Plan 999 wrote:

Smart Bro Wireless Broadband Internet is offered at Plan 999 with a speed of up to 384 kbps. With Smart Bro Plan 999 you get a a broadband connectionthat’s up to 7x faster than dial-up, as well as other Value Added Services for your Smart BRO connection, changing the way you surf the net.

^ Yeah that's what their advertisements say. But did you know that the default speed that is offered to us by Smart Bro is only limited to 256 kbps? Therefore we got about 128 kbps short of what we had expected from their service.

Hmm.. so why not do something about it. Why dont we change the default speeds (download and upload) to up to 500 kbps! Yup, we can do that. Simply Amazing right? Heheh. So just read on to know how..

But before anything else..
Disclaimer: The tutorial below was written by me FoRsAkEnKiD. Please take note that I am not forcing you to do what I am about to teach. I will not be held responsible for anything that might happen to the materials of the users involved during the process. Proceeding through the process of the tutorial means that you have acknowledged my disclaimer statement.

PART 1: Preparations

WARNING: During the process, you will be disconnected from theinternet but of course you'll be able to get back. So I suggest you copy and paste this tutorial on notepad for a safer reference, just in case.

Follow the steps:
1. Go to control panel and then onto Network Connections. You should see your Local Area Connection. Right click on it and click Properties.

2. A new window pops-up, which says "Local Area Connection Properties". On the General tab, there should be a box which contains a list with checkboxes beside them. Scroll down to the bottom and you should see the internet protocol (TCP/IP) item. Double click it.

3. Another window pops-out. It says "Internet Protocol (TCP/IP) Properties" and you should be on the General tab. There are two options there enabled by default: Obtain an Ip address automatically and Obtain DNS server address automatically. Now read carefully for this one:
- Click on Use the following IP address option. Enter these data:
- IP address: 10.20.30.40
- Subnet mask: 255.0.0.0
- Default gatewayleave it blank
- Click on Use the following DNS Server addresses:
- Preferred DNS server: leave it blank
- Alternate DNS server: leave it blank
After you entered correctly all the data, press Ok.

4. You are back at the Local Area Connection Properties window. Press Ok to apply the changes. Wait for a moment for the changes to take effect. By this time you will be disconnected from the internet. But dont worry, you'll be able to be back of course (Just refer to PART 4 below to know how to get back to the internet).

PART 2: The Canopy IP Address Quest

Now you need to know your Canopy IP Address. There are two ways I know of:

-> Method 1 (The Safe Way):
1. Go to Start -> Run -> cmd.exe. On the command promt, type arp -a (take note of the space after the word arp). The comman promt will display several IP addresses. Example:

C:\Documents and Settings\giluk_no_jutsu>arp -a
Interface: 10.20.30.40 --- 0x2
Internet Address Physical Address Type
10.0.0.1 0a-00-3e-f7-de-2d dynamic
10.247.222.45 0a-00-3e-f7-de-2d dynamic

So my Canopy IP Address would be 10.247.222.45.

Note: For some reasons, some people have encountered problems regarding the above method. If that method fails and doesnt seem to work for you, please proceed to the next method...

-> Method 2 (The Not-So-Safe Way):
EDITED (June1,2007): The site for converting you ESN code into your Canopy IP Address has either been deleted or moved by its owner. So please use Method 1 instead. Thanks.
This method is one of the most effective ways to get your Canopy IP address, but its a bit risky.

1. What you need to do is to climb up to your rooftop to reach your Smart Bro antenna (Yeah you need to climb up ). On the back side of the antenna, you should see the antenna's ESN code (you should have a combination of 12 characters composed of numbers and alphabets). Copy the code. As for minors, please ask for adults to climb the roof for you .

2. Once you have taken note of you antenna's ESN code, go to this site: http://www.freewebs.com/cympaulife/esnconversion.html to convert your ESN code into a Canopy IP Address. The resulting IP address is your Canopy IP add so take note of it (better yet, i suggest you memorize it). You're done.


There, now you have your Canopy IP Address. Hooray for you! Now let's get our hands real dirty as we go to the next part..

PART 3: Into the Forbidden Domain we Hack!

Note: Make sure you have done the set-up on Part 1 above before proceeding.

1. Open your web browser and enter your Canopy IP address on the address bar. You will be brought to the Canopy Homepage.

2. On the left side of the Canopy page, you should see a navigation box. Click Configuration.

3. Click on the Quality of Service (QoS) Tab. You should see your Bandwitdh Settings. Take a look at your Sustained Uplink Data Rate and Sustained Downlink Data Rate. By default they should be both at 256. See? Those are your default download and upload limits. Kinda sucks right?

4. Alright, so listen well. Change both of the Uplink and Downlink values to 500. Actually you can set the values to any number you like as long as their total would be 1000 (eg: you can have your downlink: 600 and uplink: 400, or you can have downlink: 700 and uplink: 300). However, The recommended value for both uplink and downlink rates is both at 500. So I suggest you have the recommended value as well. Click the Save Changes button.

5. The screen should say Reboot Required. So press the Reboot button. By this time, your Local Area Connection icon on your tray area (botton-right side of your desktop should have an X mark on it. Just wait for a while until that X mark disappears. That's it.

PART 4: Getting Back Online

The last thing you need to do is to connect back to the internet.

1. So go back to Control Panel, and then onto Network Connection. You should see your Local Area Connection. Right click on it and click Properties.

2. A new window pops-up, which says "Local Area Connection Properties". On the General tab, there should be a box which contains a list with checkboxes beside them. Scroll down to the bottom and you should see the Internet Protocol (TCP/IP) item. Double click it.

3. Another window pops-out. It says "Internet Protocol (TCP/IP) Properties" and you should be on the General tab. Now click on Obtain IP address automatically and Obtain DNS Server automatically. Press Ok.

4. You're back at the Local Area Connection Properties window. Again Press Ok. Wait for a moment for the changes to take effect.

5. Open yourWeb Broser and try to test your speed at speedtest.com or testmy.net to confirm your new download and upload speeds. You can also try going to YouTube and watch the buffer speed go zoom zoom zoom!

Internet Speed Hack

I. Open run and type regedit

II. Go to Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings

III. Right Click, make a new DWORD. Put the name value "MaxConnectionPerServer" with Value "4200000000"
IIII.

IV. Right Click, make a new DWORD. Put the name "MaxConnectionPer1_oServer" with Value "420000000"

V. Go to "Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\AFD\Parameters" make a new DWORD. Put the name "DefaultRecieveWindow" with Value "4200000000"

VI. Download SpeedGuide "Click here to Download"

VII. Open Run then type CMD and right-click as Administrator
type this:
CD\
netsh int tcp set global chimney=enabled
netsh ont tcp set global autotuninglevel=highlyrestricted
netsh int tcp set global congestionprovider=ctcp
netsh interface ipv4 set subinterface "loopback pseudo-interface 1" mtu=1500

VIII. Open Firefox, type about:config
type in the search box "pipe" then right click new integer "nglayout.initialpaint.delay" then value "0" Save it then restart firefox

IX: Run and type gpedit.msc




X. Change your DNS Setting

Choose your Connection

Click Properties


































Choose Networking





































Choose IPv4





































Use Google Open DNS. Its much faster

































Recommended:
MSMQ - tcpnodelay.reg --> http://hotfile.com/dl/44660617/56fcdc9/tcpnodelay.reg.html

XI. After installing MSMQ, Go to Control Panel Add/Remove Hardware and Choose Windows Feature On/Off


Recommended:
Autobahn Accelerator 4.2.17.104 --> http://download.cnet.com/Autobahn-Accelerator/3000-2648_4-10702444.html
RamRush --> http://www.fcleaner.com/ramrush.htm

Last. Download System.ini (http://hotfile.com/dl/44697417/e88000b/system.ini.html), after downloading press window key and search system.ini, open the System.ini you download Copy all inside System.ini that you downloaded and replace it on your System.ini

Install Addon and Make Use of It: [L4D1 on L4D2: Custom Campaigns and Maps

UPDATED MAY 9th:

Now Includes Original Campaigns!!

L4D2 Add-on Support installs a Support Package to allow running any custom map,
including the ones released for original L4D. What makes this big news is that custom maps, campaigns, and other gameplay enhancing add-ons can now be easily installed via add-on packs.
UPDATE: Newly repacked in vpk form to work in all supported gamemodes, get the L4D1onL4D2 Campaigns below.

REQUIRED:

You must have Add-on Support installed and up-to-date.

L4D1 Maps on L4D2:
L4D1onL4D2 Original and Modified Campaigns

//-------------------------------------\\

CREDITS:

Left 4 Dead 1 Original and Modified Campaigns for Left 4 Dead 2

by Campaign Creator Extraordinaire: 1SG.Heartless

L4D1onL4D2_Original and Modified_v3.1 VPK files

Edits and Packed by satannuts

nav/bsp fixes / testing

by: advarp and blake

testing:

venom

//-------------------------------------\\

DESCRIPTION:

Here are the L4d1onL4D2 Original and Modified Campaigns in vpk format.

The L4D1onL4D2 Addon Support vpk provides the extra assets and each campaign has its own vpk.

Read the changelog for info on what was updated.

For more info see: http://www.l4d2.upc-gamers.com

//-------------------------------------\\

DOWNLOADS:

Highly Recommended for all zombie lovers!!

VPK FILES:
Individually packed with 7-zip into .7z for high compression/smaller archive size.
Just use 7-zip to extract vpk files to: steamapps\common\left4dead2\left4dead2\addons Folder
L4D1onL4D2_Addon_Support.vpk is required for all other vpk files to work properly.

All Files were updated on May 9th:
MediaFire Share Folder for all files.


[Required for missing textures/models]:
L4D1onL4D2 Addon Support v2.2

Modified Campaigns:
No Mercy Modified v7.9e
Death Toll Modified v4.9e
Dead Air Modified v5.0a
Blood Harvest Modified v1.9c
Crash Course Modified v3.9e

Original Campaigns:
No Mercy Original v6.1
Death Toll Original v1.1
Dead Air Original v3.1
Blood Harvest Original v1.1
Crash Course Modified v4.1
Last Stand Original v1.6

Readme.txt/Changelog.

COMPLETE ARCHIVE:
L4D1onL4D2_Modified_v3.0.7z - will be released when the above vpk's are finalized.
All-in-one packed .7z contains all vpk files you need.
Just use 7-zip to extract vpk files to: steamapps\common\left4dead2\left4dead2\addons Folder
URL = -coming soon.

FOR BUG REPORTS:

Please Report any and all bugs, glitches, missing textues, or neon zombies
at the L4D1onL4D1 forum.

//-------------------------------------\\

ATTENTION:

File Maintenance May Be Needed.

If you previously had pack v2.1 installed, please remove all the vpk's from the addons folder and then proceed to install the newer ones. Continue reading if you have older versions installed.

If you previously had pack v1.2 installed, you can delete all L4D1onL4D2Modified files with this uninstaller:
Uninstall_L4D1onL4D2Mod.exe = http://www.megaupload.com/?d=ZF4ZZ2NF
THis will remove the winodws server files package and clients who used the other single campaign installers - not tested on linux.
Use 7-zip and extract Uninstall_L4D1onL4D2Mod.exe to your root left 4 dead 2 folder: steamapps\common\left4dead2
Run the uninstaller to remove all L4D1onL4D2 files from your game folder.
Then go to your addons folder and make sure to remove the vpk files listed below.


If you previously had pack v1.1 installed, you will need to manually delete some files from the following locations:
In [L4d2 root]\left4dead2\addons delete the following vpk files:
si.vpk
bhmodv1.1.vpk
crashcoursemodified2.6.vpk
deadairmodifiedv4.0.vpk
deadairmodifiedv3.2.vpk
deathtollmodified3.1.vpk
nmmodifiedv7.0.vpk
l4d1extraassets.vpk
infectedforl4d1maps.vpk
combined_extra_assets_beta01.vpk
pak03_dir.vpk


and from [L4d2 root]\left4dead2 delete, if it exists:
pak03_dir.vpk

//-------------------------------------\\

Left 4 Dead 2 Patch (Reccomended to play Garena)

This is a Fully-Loaded Update which will Upgrade from any version to the Latest Version.

→»» Left 4 Dead 2 Master Update Version 2.0.1.6 ~ 1.00GB [Updated on 1st May 2010]
Description: This Update will upgrade your game from any lower version to the latest 2.0.1.6. Recommended for Beginners!

This Update also Includes" Addon Support Tools " and " The Passing Addon ".

Use the Given Below Incremental Patches to gain version to the Latest one

This is a Single-Step Loaded Update which is only valid for Pre-Users of My Archived Updates. →»» Left 4 Dead 2 Incremental(Mini) Update Version 2.0.1.7-2.0.1.8 ~7MB [Updated on 8th May 2010] Description: This Patch will update your game from 2.0.1.7 to 2.0.1.8. →»» Left 4 Dead 2 Incremental(Mini) Update Version 2.0.1.6-2.0.1.7 ~9MB [Updated on 8th May 2010] Description: This Patch will update your game from 2.0.1.6 to 2.0.1.7. →»» Left 4 Dead 2 Incremental(Mini) Update Version 2.0.1.4-2.0.1.6 ~6MB [Updated on 1st May 2010] Description: This Patch will update your game from 2.0.1.4 to 2.0.1.6. Use the Given Below Standalone Patch to Play the game Online/Single Player.

2.3.1 What's this?

This is a Patch which will convert any Steam Version of the Left 4 Dead 2(PC) to Non-Steam Version and enabling you to play on Garena Efficiently. Mostly Recommended. This Patch comes with Multi-functional Features.

2.3.1 Standalone Patch - T10.3 ~ 3.7MB [Updated on 9th May 2010]
File Description: Left 4 Dead 2 Steam Emulator.

Change Log(old):

• Fixed Stryder's emulator.[Fixed]
• Enhanced the feature to Change name and Language.
• New L4D2 Control Panel with Latest Version Check[New]
• Addons Support Reg.[New]
• Integrated Garena BootStrap Parameters.
• Added Setti Non Steam Servers.
• Added all the MUTATIONS and edited blog menu.[New]
• Server Browser Button in Main Menu [New] (Credit~ kaotik2k)
• Fixed Mutations Lobby Names [New]

• " Use LAN tab for Checking Garena Servers Out and Custom/Internet Tab for Non-Steam Servers(3rd Party Non Steam Servers) "

Known Issues:

• Crash at Exit. [Ignore it]
• Achievements Will Not Save!!